• Skip to main content
  • Skip to footer
+1 (281) 661-3627 [email protected]

HENDERSON Rigs & Equipment

Drilling Rig and Equipment Refurbishment, Repair and Recertification

  • Products
    • Drawworks
    • Drilling Equipment
    • Drilling Rigs
    • Top Drives
      • FDS Top Drives
    • Mud Pumps
    • Hydraulic Power Units
    • Parts
    • Pressure Control
    • Pressure Vessels
  • Services
    • Rig Services
    • Field Services
    • Equipment Services
    • Inspections
    • Appraisals
    • Brokerage & Consignment
  • Equipment for Sale
    • Drilling Rigs
    • Top Drives
    • Drawworks
    • Mud Pumps
    • Iron Roughnecks
    • Ancillary Equipment
  • About
    • Leadership
    • Culture
    • Careers
    • News
  • Contact
Home / Drilling Rigs / Schramm T500XD 1500HP Drilling Rig

Schramm T500XD 1500HP Drilling Rig

Want more information?

Please use the form below to submit your inquiry. Our team will respond within 24 hours.

  • This field is for validation purposes and should be left unchanged.

Category: Drilling Rigs
  • Description
  • Specifications
Power Unit
  • (2) MTU 12V-2000 engines, 760 bhp (567 kw) @ 1,800 rpm with electric start
  • (2) Dual core, side by side cooling pacl‹age, 130”F (54.4“C) ambient rating
  • (2) 220 gallon (930 I) diesel fuel tanks
  • (2) Hydraulic pump systems, with each including (8) piston pumps and (1) gear type pump
  • (1) 1,000 gallon (3,785 I) hydraulic tank with (18) twin element filters

Sub-base and Walking System
  • Floor Height: 22 ft. (6.7 in)
  • Clearance: 19 ft. (5.8 in) under table bushing
  • Ground Pressure:
  • Dead Load: 26 psi (1.8 bar)
  • Live Load: 57 psi (3.9 bar)
  • Walking, mast down: 41 psi (2.8 bar)
  • Dedicated diesel engine
  • Hydraulic pump
  • 750 Gallon (2,839 I) Hydraulic Tank Included

Telemast System
  • Top Head Travel: 56 ft. (17.07 in)
  • Hook Load: 500,000 lbs. (227,227 kg)
  • Pulldown Capacity: 80,000 lbs. (36,363 kg)
  • Pulldown Speed: 0-180 fpm (0 — 55 in/min) Loaded
  • 0-200 fpm (0 — 61 in/min) Free Head

Actual Hoist Speed (both Engines)
  • 0-130,000 lbs. @ 136 fpm (0 – 58,967 kg @ 41m/min)
  • 101,000 — 285,000 lbs. @ 106 fpm (45,813 — 129,274 kg @ 32 in/min)
  • 266,000 — 305,000 lbs. @ 100 fpm (129,727 — 138,346 kg @ 30 in/min)
  • 306,000 — 419,000 lbs. @ 76 fpm (138,799 — 190,055 kg @ 23 in/min)
  • 420,000 — 500,000 lbs. @ 64 fpm (190,509 — 226,796 kg @ 20 in/min)

Tilting Top Drive
  • Power: 950 bhp (708 kw) Rotation Speed: 0-140 RPM
  • Rotation Torque: Up to 35,000 ft-lbs (47,454 N-in)
  • Swivel: 3 inch (7.6 cm) cartridge style
  • Fluid Pressure Rating: 7,500 psi (345 bar)

Rig Floor
  • 37.5 inch (0.95 in) false table adapter
  • 27.5 inch (0.7 in) Master Bushing
  • 22 ft. (6.7 in) Floor Height
  • 19 ft. (5.79 in) Under Table Clearance

Hydraulic Roughneck
  • Clamping Range: 4.5 — 9.625 inches (11.43 — 24.45 cm) diameter
  • Clamping Force: Adjustable up to 61,500 lbs @ 3,000 psi (273 kn @ 208 bar)
  • Make/Break Torque: 60,000 ft-lbs @ 3,500 psi (81,349 N-in @ 241 bar)

Loadsafe XD Pipe Handling
  • Built-in Holding Clamps with Variable Capacity from 4 – 24 inches (10 — 61 cm)
  • Seemless Make-up or Break-out of Tool Joints from Top Drive Spindle
  • Capacity: Range III
  • Maximum Lift Capacity: 10,000 lbs. (4,536 kg)
  • Average Trip Time: 1,500+ f/h (457+ m/h )

Pump
  • Fully fabricated precision frame with runners on a quadraplex oilfield skid
  • Precision machined cast alloy steel crossheads
  • Precision crossheads guides with nylatron inserts or bronze
  • Precision pinion and bull gear double helical
  • Forged fully assembled and balanced crankshaft
  • Spherical main and roller conrod bearings
  • Single piece forged 7500psi dual valve fluid modules with liner wear plate
  • Two piece liner system liner with locking nuts and splash guards
  • High Grade polyurethane valves and seats

Standard Accessories
  • Water injection system, 35 gpm (132.4 Ipm) @ 1,000 psi (69 bar)
  • DTH lubricator up to 5 gph (19 lph) @ 1,000 psi (69 bar) Air manifold for air drilling operations
  • Air/mud fluid lines, 4 inch (10 cm) stand pipe and traveling hose for 7,500 psi (345 bar) operation
  • Explosion proof 240V lighting for nighttime operation (customer supplied generators) BOP handling system
  • Carriage and Trolley Rated 40,000 lbs. (18,144 kg)

Power
  • (1) Detroit diesel 16V2000P EPA Tier 1 IMO compliant series 2000 16 cylinder
  • Four Cycle Water cooled, turbo charged
  • Diesel Engine Rated 1,072 continuous BHP @1800 RPM Atex Certified with Spark Arrester
  • L Shape Design
  • External Gear Reducer Clutch Engine Supports On-Engine Skid
  • 2 brown and sharp #4S lube pump c/w5/3 HP, 50/60HZ
  • 3 phase 240.480 190/380V Explosion proof electric motor c/w Pre-Filter, pressure gauge and piping (or equivalent) for external lubrication of all quarto bearings, crossheads, guides, etc. Cobra series 118 liner rinse pump c/w 2 HP 50/60 HZ 3-phase 240/480 190/380V marathon explosion proof electric motor with installed circulation system or equal liner rinse pump 2 HP 50/60 HZ 3-phase 240/480 190/380V electric motor c/w installed circulation piping system
  • External Lubrication System c/w lube pump with electric motor
  • 1.0hp
  • 21 60/50hz
  • 3 phase 240/480 190/380V or Equivalent
  • Strainer
  • Oil-filter
  • Pressure Gauge
  • Circulation System
  • White Star Standard 2 layers of 2 Part-epoxy Prime and 1 Layer of 2 Part-epoxy Top Coating

Support Equipment
  • 40’ Conex BoX: with spare parts for Rig
  • Drill Pipe: 5″ OD (19.5 ppf) Grade S-135 / Range 3 (15,500′)
  • BOP Equipment: Annular — Cameron type-84 13 5/8 (5,000psi)
  • Ser#112938750-01 Double Ram — Cameron type-U 13 5/8 (10,000psi)
  • Ser#112934297-01 VBR Ram — Cameron type-U 13 5/8 (10,000psi)
  • Ser#112912633-01 Choke Manifold — Cameron 4 1/16 (10,000psi)
  • Trip Tank: Fabricated Skid Mounted Tank with (40 bbl. of capacity) 4 x 3 Centrifugal Pump
  • Volume Pit: Fabricated Skid Mounted Tank with Roof and 4 Agitators (350 bbl. Capacity)
  • Class 1 Div 1 lighting
  • Mud Pumps: (2) 2012 – White Star Quatro 1,000 Horesepower Mud Pump
  • NCSO box and pin connections (6 5/8″ OD) with hardbanding

Main Winch
  • Bare Drum Pull: 9,600 Ibf. (42.7 kN))
  • Bare Drum Line Speed: 150 fpm (46 in/min) Hydraulic jib boom swing and extend
Year Made

2013

Condition

Used

Hours

10903

Horesepower (hp)

1,500

Wells Drilled

16

Last Well Drilled

March 2016

Manufacturer

Schramm

Model

T500XD

Power

Mechanical

Location

United States

Static Hook Load (lb)

500,000

Related products

  • New Schramm T500XD 1500HP Drilling Rig

    Read more
  • 2008 Service King SK575 550HP Drilling Rig

    Read more
  • IDECO H44 1000HP Drilling Package

    Read more
  • HRI 1000 Electric 250 Ton

    Read more

GET UPDATES

We constantly scour the market so you don’t have to. Get exclusive offers sent directly to your inbox every week.

Footer

Contact Us

Equipment Repair & Rig-Up Yard
9556 FM 1960
Dayton, TX 77536
+1 (281) 661-3627

Permian Basin Service Center
6510 Golder Avenue
Odessa, TX 79764
+1 (432) 517-6799

Field Service USA – 24/7

+1 (800) 898-8190

  • Email
  • Facebook
  • Instagram
  • LinkedIn
  • Twitter
  • YouTube

 

Copyright © 2025 · Henderson Rigs & Equipment, LLC
Engineered by Tribe Rocket Inc